Hp laserjet 4 plus driver for mac how to#
Hp laserjet 4 plus driver for mac install#
Hp laserjet 4 plus driver for mac software#

Those logs are automatically removed if the interface is successful- otherwise, look for them in /tmpĪargh - If I was at home I could tell you exactly how to do it, as I have a 4M+ at home. The HP script calls the script in model.orig, and also saves log files in /tmp/ using the (printerspoolername).$$ and /tmp/hpnpf.$$ ($$ is the current PID). If you need to make adjustments to the interface, you'll find it in /usr/spool/lp/admins/lp/interfaces/model.orig with the spooler name you chose. Choose 'HPLaserJet' as the model (note where that uses capital letters!).

It's generally best to use the same name throughout: if you've called the printer 'hpprinter', then make that the spooler name also. Reboot the printer/server and print out its configuration sheet so that you can confirm that it got its IP address after doing this.Ĭhoice 6 on the menu adds the printer to the spool system. You need the MAC address of the printer or print server- that's the number that looks like 00:00:C6:00:3C:7F.

If you are using BOOTP, choice 2 on the HP menu lets you add the configuration to /etc/bootptab (or you can do it manually). First, you can use the HP Printer Manager:īefore running this, add the printer name/ip address to /etc/hosts or DNS if you are not using BOOTP. There are several ways to add the printer.

Hp laserjet 4 plus driver for mac software#

Some models let you do that right on the printer itself, all have Windows software that will assign it, and if all else fails you can configure it with BOOTP.

Hp laserjet 4 plus driver for mac install#

THEN you should be able to see the Laserjet4 printer from your Win2k3 server to install drivers and set up print queues with the HP Laserjet software. Last, plug the printer back into your network with a normal CAT5 cable. YOu could THEN give the printer an IP that is valid on your network. Then in the web page, you could see if you could configure the IP settings of the printer. You could try using IE and see if the LaserJet card on the printer has a built-in web server (HP printers do usually), so you could then go to HTTP://10.1.1.4 and hopefully a web page from the printer comes up. YOu would then be able to connect from the laptop to the IP of the printer. Then configure the laptop to have an IP address of 10.1.1.3 with the 255.255.255.0 subnet. THe configuration will tell you what the assigned IP address is.Īfter that, you can take a Crossover cable, plug one end into the printer and another end into a laptop, and configure the laptop to be on the same Class C network as the printer configuration says the printer is on.įor example, if the configuration page says the printer has an IP address of 10.1.1.4 and a subnet mask of 255.255.255.0 then you would plug the crossover into the printer and the other end into a laptop. Well, I would hit the Menu button and look around for a Print Configuration option.